SERVICES
COATING & CORROSION-RELATED PROJECT SERVICES
RCCI'S HEADQUARTER: FT. LAUDERDALE, FL USA
DESIGN SERVICES:
-
Specification Development
-
Product / Material Review & Selection
-
Corrosion Mitigation Solutions
-
Coating System Compatibility
PROJECT MANAGEMENT (COATING PROJECTS):
-
Quality Control Management
-
Production Management and Scheduling
-
Review of Bid Documents and Contractors
-
Cost and Time Estimations
ASSET CONDITION ASSESSMENT
-
Life Expectancy Estimates (of existing coating systems)
-
Cost Evaluations
-
Good, Better, Best Solutions
EXPERT WITNESS / COATING & CORROSION EXPERT CONSULTING
COATING MAINTENANCE PROGRAM DEVELOPMENT & ENFORMANCEMENT
FAILURE ANALYSIS (ROOT CAUSE - FORENSIC ANALYSIS)
TRAINING & EDUCATION (MENTORING, CIP1 - 3, QC TRAINING, & MORE)
PROJECT & ENVIRONMENTAL SAFETY
INSPECTION SERVICES:
-
Quality Control (QC) Inspections (Full-Time Inspections)
-
Quality Assurance (QA) Inspections (Hold-Point Inspections)
-
One-Time / Initial / Annual / Warranty Coating Surveys
-
Supervision / Competent Person Training for De-leading/Hazardous Coatings Removal on Industrial & Marine Structures (SSPC-C3/C5)
TESTING SERVICES / SPECIALTY INSPECTIONS:
-
Adhesion Testing (via Pull-Off Adhesion Tests, Cross-Hatch Cut Test, or X-Cut Test
-
Gloss Measurements (20, 60, & 85), Reflective Image Quality (RIQ), Haze, RSpec, & DOI
-
Dry-Film Thickness / Wet Film Thickness Measurements
-
Color Variation Measurements (via a colorimeter)
-
Visual Assessment with NCI Mark-Up (i.e.: Orange-Peel, Fisheyes, Craters, Runs / Sags, etc.)
-
Lab Testing Coating Samples:
Microscopic analysis, Fourier-Transform Infrared Spectroscopy (FTIR), & Gas Chromatography–Mass Spectrometry (GC-MS)
-
UAV Inspections / Drone Surveys / Aerial Photography & Videography
-
Underwater Coating Inspections (PADI Certified Diver)